Is identifying the correct color car security wires for your cars. Cardot has created an invaluable resource containing car alarm wiring diagram, car security. Wiring diagram, car wiring schematic, car remote starter wiring diagram, auto alarm wiring. Diagram, auto security wiring diagram, auto remote starter wiring diagram, car wire diagram. Feel free to use any car alarm wiring diagrams, car security.
Wiring diagrams, auto security wire diagrams and car remote starter wiring diagrams that are. Listed here but keep in mind that all information here is provided as is without any.
Use of the wiring information is at your own risk. Always verify all wire colors and diagrams before applying any information found here to. Our car wire diagram is only for your reference, our product wire diagram is correct, you can. Install our product by our universal wire diagram. Car model or manufactuer year, we will try our best to match correct wire diagram for you!
Remote arm or disarm 2. Trunk release open by remote 4.
Car finding by remote 6. Automatic central door lock 8. Two stage shock sensor 12.
Electric/air compression lock transition 14. Remote warning mode choice 24. Remote start stop engine 27. 10 minutes count down time engine off 28.
System can start engine 3 times mostly 30. After remote start, must turn the key to ON position and then press the brake. 1 main unit, 2pcs FM LCD alarm remotes, 3 groups main cables, 1pc start module, 1pc shock sensor, 1pc LED indicator, 1pc alarm electronic siren, 1pc killer relay, 1pc reset button, 1 pc alarm antennas, 1pc english manual, 1pc color box. 2010 Mazda 3 Car Security Wiring Guide.Battery Constant 12v+ Positive Wire (+): Yellow and Orange Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness. Starter Positive Wire (+): Light Green Starter Positive Wire Location: Ignition Switch Harness. Ignition Positive Wire (+): Blue Ignition Positive Wire Location: Ignition Switch Harness. Accessory Positive Wire (+): Pink Accessory Positive Wire Location: Ignition Switch Harness. Second Accessory Positive Wire (+): White Second Accessory Positive Wire Location: Ignition Switch Harness. Key Sense Wire: Light Blue Key Sense Wire Location: Ignition Switch Harness.
Parking Light Positive Wire (+): Orange Parking Light Positive Wire Location: In Harness in Driver Kick Panel Going to Rear. Power Door Lock Negative Wire (-): Light Green Power Door Lock Negative Wire Location: At BCM Module. Power Door Unlock Negative Wire (-): Light Green Power Door Unlock Negative Wire Location: At BCM Module.Door Trigger Negative Wire (-): Green Door Trigger Negative Wire Location: At BCM Module. Dome Light Supervision Wire (-): Green Dome Light Supervision Wire Location: At BCM Module. Trunk Trigger Negative Wire (-): Brown Trunk Trigger Negative Wire Location: At BCM Module.
Horn Negative Wire (-): Blue Horn Negative Wire Location: In Harness at Driver Kick Panel. Tachometer Wire Negative Wire (-): At Injector. Brake Light Positive Wire (+): Green Brake Light Positive Wire Location: At Switch Above the Brake Pedal. Factory Anti-Theft System: Key Vehicle Immobilizer Factory Anti-Theft System Location: Key Sends RF Signal to the BCM Module.
The 2010 Mazda 3 alarm wire color and location information above is updated as it is submitted by the Modified Life community. Max current of the flash light output. Max current of the siren output.
Max current of the central door lock. Current of the shock sensor. The main unit is suggested to placed under the panel. After fixing the main unit in a.
Suitable place, start connecting the wires in accordance to the WIRE CONNECTING DIAGRAM. Before putting back all the parts, simply test the system function first. Install the sensor after fixing the main unit.
It is recommended to place the shock sensor. Near the car doors, or beside the panel so as to easily detect any intrusion actions. Adjust the sensitivity of the shock sensor, simply use a screw to turn the button in the. Shock sensor, turning right to adjust with a higher sensitivity or vice verse. Then test the sensitivity by triggering the.If i t triggered, the L. Please do not directly hit the. This system can control several common central lock types without any additional parts.
TYPE A: For cars equipped with no central lock, recommended to install it first. (see FIG 1) TYPE B: For cars equipped with central lock but no motor on driver aside, add master motor and rod.
This type of installation is applicable to operate factory lock system in some. FORD, Mitsubishi, Mazda, and Nissan models.
Installation tips: First install the actuator near the door' s manual latch, then fix the. Rod of the actuator on the manual latch TYPE C: For cars equipped with central lock and with motor on the driver' s side. (see FIG 3) TYPE D: The door locks are controlled by electrical activated vacuum pump. Actuator mechanism can be set as 0.7 seconds or 3 seconds at the JP2. For some Mercedes-benz and Audi models.
TYPED E: For some cars not mentioned above, please consult your dealers. NOTE: Type B installation method (FIG 2) is suitable for most of the cars. The remote control does not work. It is suggest to replacing a new battery each year. Check if the remote control is moisten or crash.
The remote control does not make the main unit work. Check the battery level in the remote control. Check if the frequency of the remote control is changed. If possible, use another control for comparison. If both of them do not work, then check.
The main unit and the wire connection. (Do not open the main unit for checking) The central lock does not work.Check if the actuators are working. Check wire connection Check if the fuse of the main unit is damaged. The siren does not sound when the system is triggered.
Check if the sirens are available. Check the wire connection between the siren and main unit. The siren keeps chirping while the main unit installs. Check if the socket is insert converse or check the wires connection or the CPU safety.
If back up battery is used, check if the switch is positioned at ON status. The alarm sounds 10 seconds after the vehicle is armed, same problem keeps happening again. Check if the shock sensor is too sensitive.
Check if the door pin switches are damaged. The alarm is easily triggered when a heavy vehicle is passing through. The item "Remote Engine Ignition Start Auto Car Alarm System With Window Rolling Up Output" is in sale since Wednesday, November 23, 2016.
This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Alarms & Security\Car Alarms & Security Systems". The seller is "infinexus" and is located in Shenzen. This item can be shipped worldwide.